Spec
| Product Series | Controller | Encoder | Motor | Vacuum Rating |
|---|---|---|---|---|
| X-GSM-E Motorized goniometers with built-in controllers and motor encoders | √ | Stepper Motor | – | |
| X-GSM Motorized goniometers with built-in controllers | √ | – | Stepper Motor | – |
| GSM-E Motorized goniometers with built-in motor encoders | – | Stepper Motor | – | |
| GSM Motorized goniometers | – | – | Stepper Motor | – |
| X-GSM-SV2 High vacuum motorized goniometers with built-in controllers | √ | – | Stepper Motor | High Vacuum (10-6 torr) |
| GSM-V2 High vacuum motorized goniometers | – | – | Stepper Motor | High Vacuum (10-6 torr) |
| X-GSM-SV1 Low vacuum motorized goniometers with built-in controllers | √ | – | Stepper Motor | Low Vaccum (10-3 torr) |
| GSM-V1 Low vacuum motorized goniometers | – | – | Stepper Motor | Low Vaccum (10-3 torr) |
X-GSM-E Series: Motorized goniometers with built-in controllers and motor encoders
- 30 N load capacity
- Low profile, small footprint
- 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
- Encoder position feedback with slip/stall detection and automatic recovery
- Built-in controller; daisy-chains with other Zaber products
| Model | Description |
|---|---|
| X-GSM40-E03 | 40 mm centre of rotation |
| X-GSM60-E03 | 60 mm centre of rotation |
X-GSM Series: Motorized goniometers with built-in controllers
- Built-in controller; daisy-chains with other Zaber products
- 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
- Low profile, small footprint
- 30 N load capacity
| Model | Description |
|---|---|
| X-GSM40 | 40 mm centre of rotation |
| X-GSM60 | 60 mm centre of rotation |
GSM-E Series: Motorized goniometers with built-in motor encoders
- 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
- 30 N load capacity
- Low profile, small footprint
- Encoder position feedback with slip/stall detection and automatic recovery
- Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
- With AutoDetect, the X-MCC controller configures its settings automatically for the connected peripheral
| Model | Description |
|---|---|
| GSM40-E03T4A | 40 mm centre of rotation |
| GSM60-E03T4A | 60 mm centre of rotation |
GSM Series: Motorized goniometers
- 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
- 30 N load capacity
- Low profile, small footprint
- Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
- With AutoDetect, the X-MCC controller configures its settings automatically for the connected peripheral
| Model | Description |
|---|---|
| GSM40-T4A | 40 mm centre of rotation |
| GSM60-T4A | 60 mm centre of rotation |
X-GSM-SV2 Series: High vacuum motorized goniometers with built-in controllers
- Vacuum compatible to 10-6 Torr
- 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
- Crossed roller bearings for smooth motion and high stiffness
- Built-in controller; daisy-chains with other Zaber products
- Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
| Model | Description |
|---|---|
| X-GSM40-SV2 | 40 mm centre of rotation |
| X-GSM60-SV2 | 60 mm centre of rotation |
GSM-V2 Series: High vacuum motorized goniometers
- Vacuum compatible to 10-6 Torr
- 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
- Crossed roller bearings for smooth motion and high stiffness
- Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
- Only 7 feedthrough wires required to control these units
| Model | Description |
|---|---|
| GSM40-V2T4 | 40 mm centre of rotation |
| GSM60-V2T4 | 60 mm centre of rotation |
X-GSM-SV1 Series: Low vacuum motorized goniometers with built-in controllers
- Vacuum compatible to 10-3 Torr
- 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
- Crossed roller bearings for smooth motion and high stiffness
- Built-in controller; daisy-chains with other Zaber products
- Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
| Model | Description |
|---|---|
| X-GSM40-SV1 | 40 mm centre of rotation |
| X-GSM60-SV1 | 60 mm centre of rotation |
GSM-V1 Series: Low vacuum motorized goniometers
- Vacuum compatible to 10-3 Torr
- 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
- Crossed roller bearings for smooth motion and high stiffness
- Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
- Only 7 feedthrough wires required to control these units
| Model | Description |
|---|---|
| GSM40-V1T4 | 40 mm centre of rotation |
| GSM60-V1T4 | 60 mm centre of rotation |
