常見問題

製造客製化鏡片時需要您提供下列的資訊:

• 鏡片基板材質: N-BK7, Synthetic Fuse Silica, ULE, Metal such copper, etc.
• 尺寸: 直徑、厚度。
• 表面平整度: 一般拋光的平整度規格如 𝛌, 𝛌/4, 𝛌/2, 𝛌/10 etc..
• Scratch/Dig: 如 10-5, 20-10, 40-20, 60-40, 80-50.
• 使用波長: 可以指定特定數個波長或者一個波段範圍.
• 鍍膜材質: 介電材料 or 金屬.
• 入射角: 若未指定，入射角預設為 45 度.
• 光極化方向: S偏振, or P偏振, or 未偏振.
• 反射率: Rs, or Rp, or Rmean ( average of Rs and Rp ), or R.
• 雷射損傷閥值: 連續雷射請提供功率與光束直徑，若是脈衝雷射請提供 脈衝能量、重複率、脈衝寬及光束直徑。

When need customized Lenses, please provide the following informations:

• Substrate material: N-BK7, Synthetic Fuse Silica, ULE, Metal such copper, etc.
• Dimensions: diameter, thickness.
• Surface flatness: General polishing flatness specifications such as 𝛌, 𝛌/4, 𝛌/2, 𝛌/10 etc..
• Scratch/Dig: Such as 10-5, 20-10, 40-20, 60-40, 80-50.
• Wavelength: A specific wavelength or the range of wavelengths.
• Coating material: Dielectric or Metal.
• Angle of Incidence: If not specified, the default was 45° incident angle.
• Light polarization direction: S-polarized or P-polarized or Unpolarized.
• Reflection: Rs or Rp or Rmean (average of Rs and Rp) or R.
• Laser damage threshold: For CW Laser, please provide the output power and Beam diameter. For Pulsed Laser, please provide the Pulse energy, Repetition rate, Pulse Width and Beam diameter.

請提供以下Laser 規格,我們會有適合的產品讓您挑選：

• Beam diameter ( mm )
• Wavelength ( nm )
• Max Power ( W )

Please provide the following Laser specifications and we will have suitable products for you to choose from:

• Beam diameter ( mm )
• Wavelength ( nm )
• Max Power ( W )

請提供以下Laser 規格,我們會有適合的產品讓您挑選：

• Beam diameter ( mm )
• Wavelength ( nm )
• Max Energy / Pulse ( mJ )
• Repetition Rate ( Hz )
• Pulse Duration ( ns )

Please provide the following Laser specifications and we will have suitable products for you to choose from:

• Beam diameter ( mm )
• Wavelength ( nm )
• Max Energy / Pulse ( mJ )
• Repetition Rate ( Hz )
• Pulse Duration ( ns )

• 波長要求 ( Peak Wavelength )
• 操作模式: CW or Pulsed
• 出光功率大小
• 出光點大小
• 發散角 ( full angle )
• 穩定性要求 1%, 3%, 5%
• 需電子調變與否 ( TTL, Analog )
• FC, SMA 光纖輸出 or 直接出光
• 同調長度 ( Coherent length )
• Transverse mode 模態: TEM00?
• 是否極化?

• Wavelength requirements (Peak Wavelength)
• Operating mode: CW or Pulsed
• Output power
• Spot size
• Divergence angle (full angle)
• Power Stability requirements 1%, 3%, 5%
• Modulation is required (TTL, Analog)
• FC, SMA fiber output or Free space output
• Coherent length
• Transverse Mode: TEM00?
• Is it polarized?

• 孔徑大小
• 開關速度
• 葉片鍍膜 AlMgF2, Teflon, AlSiO ( 視 Damaged threshold 值需求 )
• 是否需電子同步
• 是否用於真空
• 是否搭配顯微鏡使用? 需鏡架
• 選擇適當的驅動器

• Aperture size
• Switching speed
• Blade coating AlMgF2, Teflon, AlSiO (depending on Damaged threshold requirements)
• Whether Electronic Synchronization is required?
• Is it used for Vacuum?
• Can it be used with a Microscope? Mount is required ?
• Choose the appropriate Shutter Driver

• 類型:Single, Duolateral, Quadrant.
• 感測面積大小
• 位置解析度
• 是否需 OT-301 放大器及 OT-302D 顯示器
• 雷射光源規格是否適合

• Detector Type : Single, Duolateral, Quadrant.
• Active area size
• Resolution
• Do you need OT-301 Amplifier and OT-302D Display?
• Are the Laser light source specifications suitable?

• 應用: 調整光路 1/100, 1/10000 穿透率 or 完全防護 ( OD值越高越好 )
• 選定適合波長
• 衰減率
• 外型:耳掛式，套頭式，支援有戴眼鏡...等款式

• Application: Type attenuation to 1/100, 1/10000 for alignment work or complete protection (the bigger the number of OD value, the better protection)
• Choose a suitable wavelength
• Attenuation rate
• Frame type : Googles, Inner frame and over glasses…etc.

須確認應用時,下列主要產品規格的需求

• 移動行程 Travel Range
• 精度 Accuracy
• 解析度 Resolution
• 重覆精度 Repeatability
• 移動速度 Speed
• 載重，載台大小 Load and Dimension
• 是否需要編碼器 Encoder
• 其他特殊應用:真空，無塵室，高溫…等環境

When confirming the application, the following main product specifications are required:

• Travel Range
• Accuracy
• Resolution
• Repeatability
• Speed
• Load and Dimension
• Encoder
• Other special applications: Vacuum, Clean room, High temperature environments...